Product Description & Features:
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod Kit! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, reducing or eliminating embarrassing rotten egg smelling odors.
- FITS: Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE, A O Smith and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape and have plenty left over for the next time you check your anode rod’s condition. (Every Two Years).
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-By-Step, Printed instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you! The Included Brass Cap is there to place on your drain, after installation, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), simply cut it shorter with a hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER. The anode rod in your water heater is designed to erode instead of your Water Heater’s Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to erode and ultimately rusts, fails, cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater ensures the anode rod erodes, and not your water heater!
*** Estimated Price: $41.95
Affiliate Disclaimer: As an Amazon Associate, I earn from qualifying purchases.
RvWHS-1-1-rv water heater anode rod